Qinbrolly
中文

Umbrella plastic part

Kids Umbrella Handle

Overview

Made by
Qinxi in-house
Materials
PP, ABS, TPE soft overmould, EVA foam grip
Finish options
Bright colours as moulded, Soft-touch overmould, Pad print character artwork, Glow-in-the-dark additive

Selection tips

  • A 20-24 mm grip suits small hands; an oversized handle is less safe because children cannot hold it securely.
  • Keep every reachable edge at R1 mm or more, with no sharp points or burrs (EN 71 / CPSIA practice).
  • End caps and decorative parts must pass torque and tension tests: a part that pulls off is a choking risk, not a cosmetic defect.
  • Bright colours and character prints bring ink compliance with them: ask for phthalate and heavy-metal reports on the actual ink.

Manufacturing process & quality control points

Qinxi in-houseSupply chain / partnersIn-house or supply chain
  1. 1

    Product design & tooling

    Qinxi in-housePlastic Injection Molding

    Qinxi owns the handle model and the injection tool. A kids handle is designed around a small hand: shorter grip, smaller diameter, and no pinching cavity between the handle and the runner.

    Quality control points

    • Grip diameter and pinch clearance · Drawing review against the age-grade hand gauge · Each new tool or project
  2. 2

    Mould development

    Qinxi in-housePlastic Injection Molding

    The mould is built and sampled in-house; soft overmould versions need a second shot station, which is planned into the tool.

    Quality control points

    • Gate and overmould coverage · First-shot review; no bare substrate on the grip face · Each new tool
  3. 3

    Injection moulding

    Qinxi in-housePlastic Injection Molding

    Handles are moulded in-house. Colour consistency matters more here than on any other umbrella part, because a kids design is sold on its colour.

    Quality control points

    • Colour match · D65 light box vs approved swatch · Per batch
    • Appearance · Visual: no sink mark, no flash on the grip face · Per lot, AQL 2.5 (ISO 2859-1 general level II)
  4. 4

    Deflashing and cleaning

    Qinxi in-housePlastic Injection Molding

    Gate vestige and flash are trimmed in-house. Flash on a kids handle is a sharp-edge risk, not a cosmetic issue.

    Quality control points

    • Residual flash and sharp edge · Gloved touch check plus visual · 100%
  5. 5

    Decorating

    Supply chain / partners

    Character artwork is pad printed by the supply chain. Printed layers on a kids product are checked against EN 71-3 migration limits, and the print must survive the abrasion test so it cannot be scraped off and swallowed.

    Quality control points

    • Print adhesion and migration · Tape / abrasion test; EN 71-3 migration report per ink · Per batch
  6. 6

    Assembly and small-part pull test

    Supply chain / partners

    The handle is fitted on the assembly line and pull-tested. Any moulded-on decoration that can be twisted off is treated as a small part under the age-grade rule.

    Quality control points

    • Handle retention · Static pull test; reference 150 N per GB/T 23147-2018 · 5 pcs per batch
    • Small-part torque and pull · 90 N torque / 70 N pull per EN 71-1 where the part fits the small-parts gauge · Per batch

Used in

Kids Umbrella

Relevant compliance

Get a quote for Kids Umbrella Handle

Custom materials, finishes and logos available. Send your drawing or sample.

Request a quote