Qinbrolly
中文

Polyhedral dice

Polyhedral Die - d6 (Cube)

The standard six-sided cube die, used in almost every board game and as the base damage die in TRPGs. Zinc alloy die cast in-house; numbers or pips are engraved or stamped and filled, plating and enamel are outsourced. No assembly.

Overview

Made by
Qinxi in-house
Materials
Zinc alloy (Zamak 3 / Zamak 5)
Finish options
Gold plating, Silver plating, Antique brass, Gunmetal, Rainbow / iridescent, Enamel fill
Customization
Edge length around 16 mm, Numbers or pips, Plating and enamel colour, Weight grade for the set

Applications

  • Tabletop RPGBase damage and d6-heavy rolls
  • Board gamesMovement and resolution die
  • Collectibles & gifts

Selection tips

  • Balance matters more than finish for dice: ask for a fairness / roll-test report, not just a cosmetic pass.
  • Heavy metal dice need a dice tray or soft mat; rolling on a hard surface dents edges and changes balance.
  • Specify the number style: recessed numbers hold enamel better and wear longer than surface print.
  • For children-exposed items confirm EN 71-1 sharp-edge and small-parts rules, and REACH lead/cadmium limits.

Manufacturing process & quality control points

Qinxi in-houseSupply chain / partnersIn-house or supply chain
  1. 1

    Die design & tooling

    Qinxi in-houseZinc & Aluminum Alloy Die Casting

    Qinxi owns the 3D model and the die for the cube, so it is made in-house. Edge length and number/pip layout are fixed at the enquiry stage.

    Quality control points

    • Edge length and squareness · Engineering review of the tool · Each new tool or project
  2. 2

    Zinc alloy die casting

    Qinxi in-houseZinc & Aluminum Alloy Die Casting

    The die is cast on Qinxi's own line, de-gated and tumbled. All six faces and the edges are the visible surface, so fill and flash at the edges and number recesses are checked.

    Quality control points

    • Fill and porosity at edges and recesses · Visual check under 600-1000 lx, 300 mm distance · First 5 pieces per cavity per shift
    • Edge length and mass · Caliper and balance (0.01 g) · First article + every 2 hours
  3. 3

    De-gating, deburring and polishing

    Qinxi in-houseZinc & Aluminum Alloy Die Casting

    Dice are de-gated, deburred and tumble-polished. This is part of the die-casting process and is done in-house: a clean, flash-free edge keeps the roll true and lets the plating cover evenly.

    Quality control points

    • Sharp edge / burr · Gloved touch check plus 10x loupe · Per lot, AQL 2.5 (ISO 2859-1 general level II)
  4. 4

    Plating

    Supply chain / partners

    Plating is outsourced to Qinxi's finishing partners and verified for thickness, colour and corrosion against the agreed specification.

    Quality control points

    • Coating thickness and colour · XRF gauge; colour check vs master · One set per plating colour per batch
  5. 5

    Numbering and enamel fill

    Supply chain / partners

    Numbers or pips are engraved or stamped and filled with enamel or paint. This is done by the supply chain; legibility and fill overrun are checked.

    Quality control points

    • Legibility and fill overrun · 10x loupe vs master · Per lot, AQL 2.5 (ISO 2859-1 general level II)
  6. 6

    Balance and fairness check

    Qinxi in-house

    Dice are roll-tested for fairness: a large sample is thrown on a flat surface and the face-up frequency is checked against an even distribution (chi-square), and the centre of mass is checked by float or spin. The roll test is run by Qinxi's own QC and the record is kept per lot for the buyer.

    Quality control points

    • Face-frequency fairness (chi-square) · Roll n dice x m throws; chi-square vs uniform · Per lot, agreed sample plan

Relevant compliance

Get a quote for polyhedral die - d6 (cube)

Custom shapes, finishes and logos. Email us your artwork or sample photos.

Request a quote